河北辰力EB扁平（环眼）吊装带

       扁平吊装带的最大载荷范围为：0-50吨，长度范围为：1-100米。 扁平吊装带是采用100%PES通过编制缝合制成。并且吊装的两端可使用加强的环眼或金属配件来提高强度。 扁平带是由织机一次织成，并配以不同的缝合方法加工而成，分为单层和双层，扁平带的标准吨位除可用颜色来区分外，还可以根据宽度的不同，来区分不同的承载吨位。在吊装作业时，能够提供宽阔的、平顺的承载表面，在吊装有柔软表面的物体时特别适用，由于没有与金属件接触，对于被吊物经喷漆处理的表面造成的伤害极其轻微。 扁平吊装带对于磨损及损伤有更高的防护性，在一般吊装使用的扁平吊装带中，由于吊装带的优越性，能使其具有相当长的工作寿命，但同时在吊装作业中也需配合正确的保护套，以防止吊装带受到利器或被吊物的割伤。

       The maximum load range of the flat lifting belt is 0-50 tons, and the length range is 1-100 M. Flat lifting belt is made by using 100%PES to prepare the suture. And the ends of the lifting can be used to enhance the strength of the ring or metal parts to enhance the strength of the. Flat belt is made by weaving into a loom, and with different stitching method. It is divided into single layer and double layer. The standard tonnage of flat belt can be divided into different zones according to the width. When lifting operation, it is able to provide a broad, smooth surface, the lifting of a soft surface of the object is particularly applicable, because there is no contact with the metal parts, the surface of the suspended material by spray paint damage is extremely mild. Flat lifting belt for wear and damage are more protective, in general hoisting, the use of the flat lifting belt, because of the advantage of hoisting, which has a long working life, but at the same time in lifting operations also need to cooperate with the correct protective sleeve to prevent lifting belts by weapon or hanging cuts.